Navitel T500 3G, User Manual

Page: 41 / 136

NAVITEL NAVIGATOR - T500 3G | 41
EN
# Element Function
25 “Go!”
Tapping on the button gives a
command to the program to cal-
culate a route from the current
position or the set initial point to
the selected point.
26 “Set start”
Tapping on the button determines
the selected point as a starting
point of the route (GPS-receiver
must be switched off).
27 “Set finish”
The button is active only when
there is an existing route. Pressing
the button continues the route up
to the selected point making it the
destination point of the route.
28 “Route through”
The button is active only when
there is an existing route. Press-
ing the button marks the selected
point as a point to be included in
the route. The last added point
becomes the first one in the route
after the starting point.
29 Map Tap to return to the map.