Navitel MS500, User Manual

Page: 10 / 32

NAVITEL MS500 | 9
EN
10 Route gauges
panel The name of a street following the maneuver. Please note that if certain conditions are met,
the upcoming traffic lanes will be displayed instead.
11 Route Active route along which you are moving.
12 Speed Road speed limit is displayed next to the current car speed. The program will notify the driver in case
any traffic violations are taking place – orange colour block for set overspeeding level (by default its
10 km/h), red one for over the set overspeeding. It is possible to set the speeding level for orange
notification up to 30 km/h in the Alerts section of Settings.
13 Information
panel By default, displays a set of gauges that provide information on remaining travel time, distance to the point
of destination, and estimated arrival time. The selection of gauges can be changed in the program settings.
14 Current street The name of the current street (active only when connection with satellites is established). If the map
does not contain information about the active street name, the direction of movement is displayed
instead (North, South, West, and East).
15 Road lanes When passing the roads with two or more lanes this indicator displays information about the permitted
maneuver at the nearest intersection or turning point; progress bar under the indicator displays
the distance left to the described maneuver.
16
GPS cursor
Green cursor displays the current location of the device; gray cursor displays the last known location,
if the current one is not defined.
17 Road
regulations On the right side of the display program indicates the distance left to the closest driving regulations.
When approaching, the program displays the countdown to the closest camera, road sign or marking.