Navitel AR202 NV, User Manual

Page: 22 / 76

EN
NAVITEL AR202 NV | 21
Installation
1. Put the microSD card into the DVR. Use a high-speed SD card (U3 or above); capacity should be within
8-64 GB.
• To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during
DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. For
formatting the SD-card in Menu mode select Format SD-card and confirm it.
2. Secure the device on the windshield with the holder.
3. Connect the car charger to the cigarette lighter socket.
4. Connect the car charger to the DVR (USB-C).
5. Adjust the camera position.
6. Turn the power on; check whether the device is installed correctly. If the device is installed correctly, the
indicator will glow red; the device will start up and begin recording (indicated by flashing blue light).
Precautions
• Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
Use accessories only approved by manufacturer.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative
humidity: 5% to 90% without condensation (25 °С).
• Put the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Keep the lens clean. Do not use chemicals or detergents to clean the product; always turn off the device
before cleaning.
• Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be
used for illegal purposes.
• Do not disassemble or repair device by yourself. In case of device failure, contact the service center.