23
On-Screen Menu Control
Option
(menu page 6)
Adjusting the Horizontal Phase
1.
Set the arrow “
→
“ to H PHASE by pushing the
MENU UP, MENU DOWN buttons.
2.
Adjust the horizontal phase by pushing the DATA
UP, DATA DOWN buttons. The values range from
-99 to 99, DATA UP will increase the setting
towards 99 and DATA DOWN will decrease it
towards -99.
Coarse Adjustment of the Sub Carrier Phase
1.
Set the arrow “
→
“ to SC 0/180 by pushing the
MENU UP, MENU DOWN buttons.
2.
Select either 0 or 180 by pushing the DATA UP,
DATA DOWN buttons.
Adjusting the Sub Carrier Phase
1.
Set the arrow “
→
“ to SC PHASE by pushing the
MENU UP, MENU DOWN buttons.
2.
Adjust the sub carrier phase by pushing the DATA
UP, DATA DOWN buttons. The values range from
-99 to 99, DATA UP will increase the setting
towards 99 and DATA DOWN will decrease it
towards -99.
Option factory settings:
— 6 OPTION –-
→
OUTPUT1
RGB
OUTPUT2
VBS
NEGA/POSI
POSI
DTL OUT
OFF
SHADING
OFF
G SYNC
ON
Use the MENU UP, MENU DOWN buttons to move the
arrow “
→
“ to the menu selection you want to set.
Then, push the DATA UP, DATA DOWN buttons to
adjust the setting.
