![background image](http://html1.mh-extra.com/html/navitar/videomate-2030/videomate-2030_instruction-manual_3608969013.webp)
13
Troubleshooting
Troubleshooting
Symptom #1:
After switching on, projector is not operable.
Possible Cause:
1. All equipment not “powered up”. Check outlets and
individual unit (monitor, video projector, etc.).
2. Check input voltage selector.
3. Lamp blown. Look in film gate for “light on condition”.
Also depress select bar to check for stuck gate
shutter.
4. Fuse is blown. Check fuse and replace if necessary.
5. Wait 1 minute with the power switch off and try to
restart.
6. Bad cables.
Symptom #2
Unable to recover picture after brief interruption of power.
Possible Cause:
1. The lamp has blown with the thermal shock of turning
on.
2. The gate shutter is stuck in the closed position. Push
down on the select bar.
Symptom #3
The tray can not be moved.
Possible cause:
Tray has not been placed correctly on the transport ring.
Lift off the tray, switch projector on and then off again and
then replace tray.
All manuals and user guides at all-guides.com