4
Optional Remote & External Dissolve Controller
Operating Optional Proportional Remote
To manually fade the lamp on and off, you must use the optional Navitar Propor-
tional Remote Control.
Shut the TIMER ON/OFF switch to OFF. Then turn the remote full counterclock-
wise (zero ohms) and connect the proportional remote to the Navitar FX remote
socket located next to the dissolve knob.
The projector lamp will stay on. Now slowly turn the remote clockwise and note
the projector’s lamp dimming. When the lamp is off, continue to turn the control
and the projector will automatically advance.
Wait for the projector to finish its advance cycle and then turn the control coun-
terclockwise to turn the lamp back on.
The PROPORTIONAL REMOTE socket can be used as a remote ON/OFF for
the fader and timer.
Connecting to an External Dissolve Controller
Plug the enclosed phono jack into the remote socket (next to the dissolve knob).
This will defeat the internal dissolve/timer controls. Now your projector can be
used in a multi-media show and controlled by an external dissolve controller
(AVL, Arion, etc.).
Specifications
For general projector specifications, refer to your Kodak
manual.
Navitar FX specifications are as follows:
Dissolve
Dissolve
Dissolve
Dissolve
Dissolve
1-12 second variable.
T
T
T
T
Timer
imer
imer
imer
imer
1-10 second variable.
Lamp
Lamp
Lamp
Lamp
Lamp
GE Model EXW.
Remote Control
Remote Control
Remote Control
Remote Control
Remote Control
Standard Kodak 5 pin remote control.
Multi-media
Multi-media
Multi-media
Multi-media
Multi-media
Insert phono jack into remote socket (located next to
dissolve knob) to defeat built-in dissolve/timer controls.
Manual Dissolve
Manual Dissolve
Manual Dissolve
Manual Dissolve
Manual Dissolve
Connect the Navitar proportional remote control to the
remote socket located next to the dissolve knob.
All manuals and user guides at all-guides.com
