background image

Telec

en

tr

ic L

enses

92

http://machinevision.navitar.com  

 

•                     email: [email protected]

working 

distance

diameter

f

53.6 (2.11)

4.0 (.16)

f

29.5 (1.16)

1-32 UNF (C-mount)

clamp in this area

INVARIGON P/N

 LGU

length

dimensions in mm (in.)

1

The maximum object dimensions shown in the table are 90% of the theoretical maximum dimensions, providing a safety factor for magnifi cation and alignment errors.

Image-side working f/# with lens aperture fully open. For combinations with teleconverters, the minimum image-side f-number is increased by the teleconverter 

  magnifi cation.

3

Lenses operated at smaller f/# may show reduced resolution, especially near the edge of the fi eld of view.

4

Depth of fi eld is calculated at f/11 for lenses with minimum operating f/# < f/16 (f/22 for all others) and for 30-µm allowable blur at the image (camera) plane.

Note: Distortion is less than 1.2% for all lenses. Contact Navitar for specifi c 
distortion characteristics for a particular lens. 

Single-Sided Telecentric

Part Number

Mag. 

(nominal)

Length

Diameter

Working

Distance

Maximum Object Dimensions (in)

1

Min f#

2

Min. 

Operating 

f#

3

Depth of 

Field

(in.)

4

mm. 

in.

mm.

in.

mm.

in.

1/3” CCD

1/2” CCD

2/3”CCD

59 LGU 013

0.13X

217

8.5

80

3.2

190

7.4

1.02 x 1.36

1.36 x 1.81

N/A

1.4

4

1.66

59 LGU 016

0.16X

176

6.9

70

2.8

150

6.0

0.82 x 1.09

1.09 x 1.45

N/A

1.4

5.6

1.06

59 LGU 018

0.18X

154

6.1

61

2.4

130

5.2

0.71 x 0.95

0.95 x 1.27

N/A

1.4

5.6

0.81

59 LGU 022

0.22X

170

6.7

70

2.8

150

6.0

0.59 x 0.78

0.78 x 1.04

1.07 x 1.43

1.6 

8

0.54

59 LGU 025

0.25X

148

5.8

61

2.4

130

5.2

0.51 x 0.68

0.68 x 0.91

0.94 x 1.25

1.6 

8

0.42

59 LGU 029

0.29X

126

4.9

54

2.1

110

4.4

0.44 x 0.59

0.58 x 0.78

0.80 x 1.07

1.6

8

0.31

59 LGU 031

0.31X

171

6.7

70

2.8

150

6.0

0.41 x 0.54

0.54 x 0.72

0.74 x 0.99 

2.3

8

0.27

59 LGU 036

0.36X

149

5.9

61

2.4

130

5.2

0.36 x 0.47

0.48 x 0.63 

0.66 x 0.87

2.3

8

0.20

59 LGU 042

0.42X

126

5.0

54

2.1

110

4.4

0.31 x 0.41

0.41 x 0.54

0.56 x 0.74

2.3 

8

0.15

59 LGU 050

0.50X

105

4.1

54

2.1

90

3.6

0.26 x 0.34

0.34 x 0.45

0.47 x 0.62

2.3

11

0.10

Telecentric performance (<0.2° chief ray angle over 

the entire object fi eld) allows precise gauging of 

3-dimensional objects. 

• Large selection of magnifi cations covers most applications.

 

• Lockable aperture adjusts to select the required 

   

    depth of fi eld.
• Fine focus adjustment provides sharper images. 

Rugged single-piece design stands up to harsh 

• 

industrial environments. 
High-performance multi-layer coatings provide the

• 

 high-

est image clarity, especially for back-lit applications. 
Standard C-mount camera interface. 

• 

Features

The Invarigon-R™ family of gauging lenses provides telecentric imaging with a wide selection of magnifi cations. Invarigon-R™ 

gauging lenses are the most cost-eff ective choice for critical inspection and metrology imaging applications.

Invarigon-R

 Lens Specifi cations

Invarigon-R™

Teleconverter accessories can be used with select 

Invarigon-R

 lenses (59 LGU 031, 59 LGU 036, 

59 LGU 042, 59 LGU 050) to increase magnifi cation by 

a factor of 1.5x or 2.0x depending on the lens combina-

tion. Teleconverters cannot be used with certain types of 

3-CCD color cameras. 

Accessory Note:

Summary of Contents for 1-17766





















Reviews: