SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
Service Procedures
GOVERNMENT
REGULATION:
Engine
fluids
(oil, fuel, and coolant) may be a hazard to human
health and the environment.
Handle all fluids
and other contaminated materials (such as filters,
rags) in accordance with applicable regulations.
Recycle or dispose of engine fluids, filters, and
other contaminated materials according to applicable
regulations.
WARNING
To prevent personal injury or death,
shift
transmission to park or neutral, set parking
brake, and install wheel chocks before doing
diagnostic or service procedures.
OIL LEVEL
Service Interval: Before Engine Operation
1.
Park vehicle on level ground.
NOTE: Do not check oil level if engine is running or
immediately after engine shutdown.
2.
Shut down engine and wait 15 minutes.
3.
Remove oil level gauge from fill tube.
Figure 27
Oil level gauge (typical)
CAUTION
To prevent engine damage do the following:
•
Assure oil level readings are within the
crosshatched operating range on the oil level
gauge.
•
Do not overfill the engine with oil.
•
Do not operate engine if oil level is above or
below the operating range.
Page 60
Summary of Contents for MaxxForce 10
Page 8: ......
Page 10: ...FOREWORD Page 2...
Page 14: ...SAFETY INFORMATION Page 6...
