Operator Interface
NOTE!
If you want to view help for operation with a particular system window:
– open this window;
– open the Help window on the second side of the screen (at the
left/right).
In this case a section containing information for operation with the
opened window will be displayed (see Figure 5.12).
Figure 5.12: Help Window (Manual Thruster Section) — Manual Thruster Window
5.4
Position and Heading Display (Map View)
The Map window (Figure 5.13) contains the vessel’s position and heading information. The information representation
depends on an active mode.
5.4.1
Vessel heading displaying
Actual Heading
Actual heading is shown:
– numerically
– graphically by yellow marker
Numerical indicator and markers are displayed in all control modes.
Heading Setpoint
Heading setpoint is shown:
– numerically
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
70
