NAVIOR-24S
™
Appendix B
Navis Standard Interface Protocol BINR
126
NAVIOR-24S ™
Revision
V1.00 20.05.2008
Time modes settings
Set/Request Packet 1Dh
Packet 1Dh is used especially in receivers of time/frequency synchronization.
To enable mode of operation with coordinates, packet 1Dh must have following structure:
1 - data type: of operation mode setting
Data type format - INT8U
2 - operation modes.
00 – navigation mode: for mobile objects
02 - average-position mode. In this mode coordinates are averaged within 24h and the
computed values are used for switching to the fix mode (operation mode with known
antenna coordinates). After switching to fix mode statistical data will be reset.
01 - fix-position mode (operation mode with known antenna coordinates)
Data type format – INT8U
For compensation parameters sets for antenna cable delay, packet 1Dh must have following
structure:
1 - data type: antenna cable delay compensation settings
Data type format - INT8U
2 - antenna cable delay compensation parameter, msec
Data type format – FP64
