Navini Networks, Inc.
Ripwave-MX Modem User Guide
Safety
When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce the
risk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions
that come with the equipment.
1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
equipment to water could cause severe electrical shock or serious damage to the equipment.
2. Do not immerse the equipment in any type of liquid. Use a damp clothe and if needed, water and a
mild detergent to clean the plastic shell. Unplug the equipment from the
power source before
cleaning.
0
source may cause
damage to the equipment.
e with
r manual.
. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on
. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock
lace the equipment on an unstable surface. It can fall and cause injury or damage to the
equipment.
trical shock. Only
an authorized repair technician should service this product.
1. Do not expose the equipment to extreme hot or cold temperatures.
2. Do not use the equipment under the following conditions:
•
When the equipment has been exposed to water or moisture.
•
When the equipment has been damaged.
•
When the power cord is damaged or frayed.
•
ance.
3. Follow all airport and FAA regulations when using the equipment on or near aircraft.
4. Only operate the equipment from the type of power source(s) indicated in this manual (110/22
VAC, 60/50 Hz adapter or Navini supplied battery). Any other type of input power
5. Power the equipment using only the battery or the AC adapter cable provided, and in accordanc
the instructions specified in the use
6
or tripped over.
7. Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
8
or fire.
9. Do not p
10. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and
also voids the warranty. Incorrect reassembly can cause equipment damage or elec
1
1
When the equipment does not operate properly or shows a distinct change in perform
4
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)