Navini
Networks,
Inc.
Ripwave
Modem
User
Guide
Troubleshooting Using
Ripwave Monitor,
continued
To check connectivity to the Service Provider’s network, click the
Advanced button on the Ripwave Monitor window. The Advanced
section of the window appears and displays several strings of
characters representing selected IP-addressable nodes in the
network. These strings of characters (displayed) and the associated
IP addresses (not displayed) are configurable by the Service
Provider on a BTS-per-BTS basis. Note that if the connection
between the Ripwave Modem and the Base Station is down, the
Advanced button will be disabled (grayed out).
The blue question marks on the right side of the Advanced section
indicate that all connections are untested. Now click on the Run
Tests button at the bottom of the window. The PC will attempt to
ping the IP address associated with each one of the character
rings. Each blue question mark will change to either a blue
heckmark or a red circle with a slash mark. A blue checkmark
dicates that the connection to the IP is good. A red circle with a
ash mark indicates there is a problem with that connection to that
.
ve
st
c
in
sl
IP
The features of the Advanced and Run Tests buttons are to be used
in conjunction with your Service Provider Technician to resol
problems. There is no need to use these features unless you are
experiencing problems with the Modem.
Part #40-00097-00 Rev F v1.0
27
May 21, 2004
