background image

8. Possible sources of error and their elimination 

8.1 The white LED on USB plug A doesn’t light up after the first connection to the USB port. 
 

Make sure that the PC or notebook is turned on, and test the USB port, possibly with another 
USB device. If this other USB device works fine, please contact the support center. 

8.2 You still don’t get a satfix.  
 

The NL-82022MP needs up to 20 minutes for its first satfix on another continent. To get a satfix 
the line of sight to the sky must be unobstructed. Move the NL-82022MP as far as possible from 
the wall. A wall reflects the signal strongly and contributes to the satfix time delay. 

8.3 Your PC doesn’t support the auto start function, and doesn’t start the CD-ROM automatically. 

Please check 

http://msdn2.microsoft.com/en-us/library/Aa969329.aspx

8.4. The NL-82022MP came in touch with jet water (water jet from a shower head or strong rain when 

it was mounted on a car roof). Do not connect the receiver with the notebook etc. under any 
circumstances, because it can otherwise be completely and irreparably destroyed. Return the 
receiver to our support center, mentioning “water damage”. The support center will disassemble 
the receiver, dry it and check its functionality. 

 

The Navilock repair center tries to be as obliging as possible, so please tell us the real reason for 
the defect. During the error analysis, we can generally detect if the cause for the defect was an 
external cause, water damage, fall, over-voltage or the wrong handling of the unit. 

 
Before visiting your dealer, please contact the Navilock support center. They will try to help you quickly and 
without further ado, so that the circumstances of an exchange, which might in any case be unnecessary, 
are avoided. 
 
In this case, please write down a detailed description of the error, add this information to your end device 
and the software used in this device, as well as the operation environment (operating system, service pack 
version, CPU type, storage size, hard disk drive and interface etc.), and send an e-mail to 

[email protected]

.  

 
A support member will look into your problem and work out a solution.  
 
We hope your Navilock product brings you fun and enjoyment! 

Summary of Contents for u-blox 8 NEO-M8U













Reviews: