After starting the u-center software, check the functionality of your NL-8002U.
1. Selecting the COM port
2. Selecting the baud rate
3. Downloading Assist GPS and updating the receiver
4. Visual display of the NMEA data
5. Configuration manager
6. NMEA/UBX message console
7. NMEA text console
As seen below, you can set up your u-center by yourself. Everything important can be connected
and displayed immediately. The green bars at the bottom of the picture show the reception
quality at your position. If no bars are displayed, please change your position. The NL-8002U
cannot receive anything in a closed building. If the blue bars are displayed, the receiver is still
acquiring the data and verifying the receipt data.
2.
The choice of which GNSS want to use, take as follows
