Navilock NL-130BK, User Manual

Page: 9 / 23

9
In this screen there are settings for:
1. Background lighting On/Off.
2. Time zone adjustment, eg. Berlin summer time
+ 2 hours, winter time +1 hour.
3. Switching from kilometers to miles (not available
in the current firmware version).
4. To switch the time display between 24 and 12
hours.
5. To switch between manual and auto change of
the information screen. When auto change is
set, an A will be displayed below the battery
icon, when manual is set this will be an M.
6. Exit
To change any setting, press Enter once, then select
the desired item with the left or right arrow key. Press
Enter, and change to the desired value with the arrow
keys. Press Enter to confirm. To exit, use the arrow
keys to go to Exit, then press Enter.
When the background lighting is off, pressing any key
will automatically turn it on again; it will go out 10
seconds after the last push of a button. If the
background lighting is turned on it will stay on. This is
an important function, especially during night rides, but
it reduces the battery operation time between charges
considerably.
If you want to save a waypoint but no satellite fix is yet
available, “GPS positioning” will be displayed. A
waypoint can only be saved after a satellite fix has
been achieved, until then, no latitude and longitude
data are available.
If you save a waypoint, this will be confirmed by “PO|
Saved”.
The “About” screen provides Navilock contact
information.