Navigon Sync 8100T, User Manual

Page: 151 / 193

Hands-Free Operation (Bluetooth)
Connecting (Pairing) with a Mobile Phone
November 2008 NAVIGON 8100T User’s Guide 129
NAVIGON, INC.
The mobile phone prompts you to enter a PIN code.
5. Enter a four-digit PIN code.
On the navigation device:
The NAVIGON 8100T prompts you to enter a PIN code.
6. In the PIN Code field, enter the same PIN code that you entered on the mobile
phone.
7. Tap OK .
The
H
ANDS
-F
REE
M
AIN WINDOW
displays. A connection is established between the
two devices.
On the
NAVIGON 8100T H
ANDS
-F
REE
M
AIN WINDOW
, the Keypad , Address Book ,
and Recent Calls buttons are now available. The Bluetooth status icon in the
upper right-hand corner displays in gray ( ).
Terminating the connection between the NAVIGON 8100T and the
mobile phone
You can terminate the connection between the
NAVIGON 8100T
and the mobile phone
at any time.
In the H
ANDS
-F
REE
S
ETTINGS WINDOW
:
1. Tap Mobile Phone Connection > Delete Device .
You will be prompted to confirm that you want to terminate the connection.
2. Tap OK .
On the NAVIGON 8100T H
ANDS
-F
REE
M
AIN WINDOW
, the Keypad , Address Book ,
and Recent Calls buttons are no longer available. The Bluetooth status icon in
the upper right-hand corner displays in red ( ).
You must establish the next connection to a mobile phone manually. (See “Connecting
(Pairing) with a Mobile Phone” on page 127).
Note: A PIN code can be any four digits. However, the same 4 digit PIN code must
be provided to the navigation device in order to complete the pairing.
Note: You don't need to terminate the connection manually. The connection is ter-
minated automatically when the mobile phone moves out of range (approximately
30 feet (10 meters) from the
NAVIGON 8100T
). Connection data is saved so that the
connection can be restored automatically when the mobile phone comes back into
range.
Note: When the connection is terminated using this procedure, the
NAVIGON
8100T
can not establish an automatic connection to a mobile phone, including the
same mobile phone as for the last connection.