S
AFETY AND
M
AINTENANCE
29
1.
Remove the protective foil from the sticky side of the suc-
tion plate.
2.
Fix the suction plate to a suitable location on the
dashboard. Take care, that the surface of the dashboard is
clean and press the suction plate strongly onto the surface.
Note: To obtain a strong and secure hold the suction
plate should not be used for 24 hours.
II.
F
IXING THE SUCTION PLATE
Note: Clean the disk thoroughly with a glass cleaner.
Warm the disk and the nipple slightly at tempera-
tures below 15° C.
Place the holder with the suction head onto the suction plate (or
directly onto the wind screen) and press the lever on the suction
head downwards. The sucker will attach itself to the background
firmly.
III.
A
TTACH
N
AVIGATION
S
YSTEM
1.
Connect the car adapter (see page 17) and, if necessary,
the external GPS aerial, to your navigation system and in-
sert the memory card.
2.
Position the support on the attachment holes on the back of
the device.
3.
After you have put the device on the support, push the
navigation system downwards until it locks into place au-
dibly.
4.
Now you will be able to place the complete unit on the
cleaned windscreen or the suction plate
i
i
Summary of Contents for PNA Transonic 6000T
Page 52: ...ENGLISH 48 ...
