
Industrial Cellular VPN Router NR500 Series User Manual
Page
52
/ 78
•
Local Port
Sets the LAN port number range used when forwarding to the destination IP address.
Firewall->DMZ
•
Enable
Check this box to enable DMZ function.
•
Remote Address
Optionally restricts DMZ access to only the specified WAN IP address.
NOTE:
If set to 0.0.0.0, the DMZ is open to all incoming WAN IP addresses.
•
DMZ Host Address
The WAN IP address which has all ports exposed except ports defined in the Port Forwarding
configuration.
4.5.2
Route
Static Routing refers to a manual method of setting up routing between networks. Select the
Static Routing tab to add static routes to the Static Route Table.
Please refer current route table as below.
Route->Route Table Information
•
Destination
Displays the destination of routing traffic.
•
Netmask
Displays the subnet mask of this routing.
•
Gateway