NAVCAM-FHD360
USER MANUAL
7
NavCam-FHD360 Manual Ver 2.2 12/2014
Note: If G-Sensor is selected, recording will start automatically when there is movement
detected. This setting is ideal for when the car is parked or unattended. Note that if left on
battery power (car is turned off), the standby time and record time will be dependent on the
level of charge on the battery.
Iif the motion detection feature is selected whilst driving, the camera will stop recording
when no movement is detected, such as when stopped at a traffic light, but will recommence
recording when the car moves again.
Playback
Use the MODE button to select Playback of recorded content – either video or photos.
Available Options:
Option
Option Description
Arrow Up
Arrow Down
Press Up and Down arrows to browse files.
Play / Pause
Press REC Button
Delete
With the selected file visible on the screen, press the MENU
button. Then use the up and down the arrows to choose DELETE
THIS FILE (or ALL files) and then the REC button to confirm your
choice.
Video Recording Setting
Turn on the CRASHCAM-FHD360 (and press the REC button to stop recording video) then
press the MENU button. Press the
▲
/
▼
buttons to select one of the setting options and
press then REC to select that option.
In the event of an incident/accident
–
Use Auto Bump File Save
.
- Due to the “cycle recording” nature of this technology, older recorded files will be overwritten (depending on
the resolution settings and the memory capacity of the Micro SD card).
- Should you wish to KEEP (protect) the video footage of an incident from not being overwritten, press the
MODE button during recording. A “pad lock” confirmation icon will appear on the screen.
- Alternately the in-built G sensor will trigger an auto save lock if it senses a bump (sensitivity is selectable via
the Menu), so that the file being recorded is not overwritten in the cycle record process. The onscreen car icon
will then begin flashing.
