BEARINGS, SCREWS, BRAKES AND WHEELS:
Your electric scooter is made up of moving parts, which in time, will be susceptible to wear
and tear.
The electric scooter has sealed and dustproof bearings so that no lubrication is required.
Check the bearings for wear at regular intervals to avoid unsafe riding. Do not jump on and
off and do not apply excessive force to avoid damage to the bearings.
This is not a sports electric scooter.
Make sure that all screws are properly tightened to avoid unsafe situations.
Please check the screws regularly and tighten if they seem loose.
Brakes:
Check the brake for wear at regular intervals to avoid unsafe riding. Do not apply excessive
force to avoid damage to the brake.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
If the wheel seems wobbly even after screws are tightened, the bearings might be worn
down and need replacement
STORAGE AND CLEANING:
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water gun or running water, as this could damage vital parts. It is also possible to
use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure to
cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Warning: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to high
temperatures caused by direct sun for a long time.
