Product Installation Guide
Setting Temperatures
1. Install
2. Connect
3. Filling
Water
ʒ
ʓ
ʒ
ʓ
ʒ
ʓ
ʔ
ʕ
ʖ
Put the cover on the pad.
Place the host of the pad toward the feet
and leave the
space between the heating unit and the pad over
ft.
cm
Lay down the hose of the pad
ȵ
at facing the
Ȋ1
avien Logo
ȋ
upward without tangling.
Push the pad hose connector to the back of the heating unit
water outlet/inlet connector
ȴ
rmly all the way until you hear
a
Ȋ
click
ȋ
sound.
Ȥ:UVXK\KTZGJK\OGZOUTXOYQULZNKIUTTKIZUXX[HHKXXOTMOYGZZGINKJ
ZUZNK]GZKXU[ZRKZOTRKZIUTTKIZUX'RZNU[MN_U[IGTLKKRGYZOLLTKYY
]NKTGVVXUGINZUZNKIUTTKIZUXLUXZNKLOXYZZOSKYULZKX
IUTTKIZOUTOYG\GORGHRK]OZNZNKSUOYZ[XK
Pull the water inlet cover and turn the water cap counter
clockwise to open.
Check the water level lamp and slowly pour down the water.
Ȥ
The amount of water to be
ȴ
lled is
ml for king size
ml
for queen size
and
ml for single size.
If the 4th-level water lamp is on
stop
ȴ
lling the water and
wait for a little bit.
When the
st water level lamp blinks again
ȴ
ll the water
until the 4th water level lamp is turned on.
Close the water cap by turning it clockwise until there is a
click
sound
and close the cover.
ʒ
ʓ
When
Ȇ
UP
ȇ
is displayed on the screen and a
noti
ȴ
cation sound is on after setting the
temperature at
.
ȯ
ȭ
wait for about
seconds.
Press the
Ȋ
+
ȋ
button again after
seconds and
temperature will be set over
ȯ
ȭ
.
The left/right temperatures of the pad can be set at
intervals of
ȯ
by touching the
ȋ
- / +
ȋ
buttons on the
L/R display windows.
Ȥ
Heating temperature can be set from
ȯ
to
ȯ
.
1. Setting the left/right temperature
2. Setting temperatures over 100
Ƚ
3. To turn off the heating on one side, touch the “–” button once more at 77
Ƚ
.
1ft
click!
1
2
Flashing
