NAVICOM RT-300, Installation And Operation Manual

Page: 4 / 15

3
Backlit LCD Display -------- allows you to operate the transceiver in
dark environment.
Memory Channels ---- lets you store channels as memory channels.
DW/TRI ----
lets you to select DW/normal mode or TRI/normal mode.
We recommend you record your radio’s serial
number is on the transceiver’s back panel.
number here. This
Serial Number_______________________
SAFETY INFORMATION
Your hand-held marine VHF radio is NOT approved for use by the
general population in an uncontrolled environment. This radio is
restricted to occupational use, work related operations only where
the radio operator must have the knowledge to control its RF exp-
osure conditions.
1. When transmitting, hold the radio in a vertical position with its
microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth
and keep the antenna at least 1 inch (2.5cm) away from your
head and body.
2. The radio must be used with a maximum operating duty cycle
not exceeding 50%, in typical Push-to-Talk (Manual PTT) co-
nfigurations.
DO NOT transmit for more than 50% of total radio use time
(50% duty cycle). Transmitting more than 50% of the time
can cause FCC RF exposure compliance requirements to be
exceeded.
The radio is transmitting when the "TX" icon on the LCD splay.
You can cause the radio to transmit by pressing the PTT button.