05
06
EN
EN
Care & Maintenance Plan
The expected service life for NAVEE electric scooters is 3 years, and the expected mileage is 10000 km. When
the scooter is used for more than 3 years or the total riding mileage exceeds 10000 km, it is recommended to
have it serviced at an authorized repairer. The following table shows the recommended maintenance items and
frequencies.
Scooter Maintenance Schedule (Recommended):
Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards,
minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life.
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Tires
Tire Pressure
Inflate the tire until its
pressure reaches
45-50 psi.
√
√
√
√
Tire Tread
Wear
Check whether the tire is
cracked, deformed, worn,
etc.
√
√
√
Screws
Handlebar
Assembly
Screws
Tighten the screw that
connects the handlebar
assembly with the stem
assembly (with the
recommended torque of
4.8 ± 0.2 N·m).
√
√
√
√
Tighten the accelerator
screw (with the
recommended torque of
1.6 ± 0.1 N·m).
√
√
Tighten the brake
lever screw (with the
recommended torque of
5 ± 0.2 N·m).
Disc Brake
Caliper
Tighten the screw that
fixes the disc brake caliper
(with the recommended
torque of 3.5 ± 0.5 N·m).
√
√
√
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Functions
Brake
Adjustment
Before adjusting, make sure the
scooter is turned off and not being
charged.
Tool: 4 mm hex key (the tool needs
to be prepared by the user).
During adjusting, pull the end of
the brake cable to make the cable
tight.
Notes:
· If the brake is too tight, use the
tool to loosen the screw by turning
it counterclockwise, pull the disc
brake rocker arm outwards, and
then tighten the screw. If the
brake is too loose, use the tool
to loosen the screw by turning it
counterclockwise, push the disc
brake rocker arm forwards, and
then tighten the screw.
√
√
√
Charging
Charge the scooter at a suitable
temperature. The indicator on
the battery charger is red when
the scooter is charging, and
turns green when the scooter is
fully charged. The control panel
will show the charging status
simultaneously during charging.
√
√
√
Steering
Turn the handlebar 60° to the left
and right to make sure the turning
angle is correct and the steering
is free from resistance and
stagnation.
√
√
Important
Components
Battery
Assembly
Fully charge the scooter before
leaving it unused for a long time,
and turn it on to charge every 60
days.
√