NavCom Technology LAND-PAK User Manual Download

Page: 44 / 120

LAND-PAK

™ User Guide – Rev. A

3-42

Refer to the supplied

SF-3040 GNSS

Receiver Product User Guide

for

complete details on battery charging,
installation, use, safety, and disposal.

The SF-3040 GNSS receiver battery packs are keyed
to prevent improper installation. There are two locking
clips on either side of the battery bay.

Figure 11: Battery Packs Installed in Chamber

Showing Locking Clips

Ensure that both locking clips are
locked in place.

If both locking clips

are not locked in place, the battery
packs can disengage.



Battery Removal

With your thumb, push a locking clip to the side (refer
to Figure 11). The battery pack should pop out
enough to be pulled free of the chamber. Repeat for
the second battery pack.

Nautiz X7 Battery Pack

This section provides steps to charge the battery
pack for the Nautiz X7.

Locking
Clip

Summary of Contents for LAND-PAK

























































































































Search results

Summary of Contents for LAND-PAK

Reviews:

Related manuals for LAND-PAK

Brands by name

Popular brands

NavCom Technology LAND-PAK, User Manual

Search results

Summary of Contents for LAND-PAK

Reviews:

Related manuals for LAND-PAK

Brands by name

Popular brands