NX310WA NX310WP
INSTALLATION
3
Main Power Connections
C12V, GND wires accordingly. A suitable fuse MUST be installed on the +12V
lead within 18" of the battery for protection of the vehicle's electrical system.
SPEAKER OUT
When using this woofer system as a Master/Slave, the amplifier will increase the power
output to match the added speaker, giving your bass an added boost.
REMOTE BASS KNOB
This knob will mount in your dash as a factory switch would, giving you access to control
the volume output manually.
INPUT/OUTPUT
This woofer system can be “DAISY CHAINED” to other NavAtlas product to help simplify
the installation and reduce the use of extra wiring, giving you a clean looking setup.
NOTE: When adding amplifiers or amplified speakers to your vehicle, please be sure to consider
upgrading your factory battery and wires to ensure you get the most from your system.
NX310WA NX310WP
1. POWER WIRE - 12V/GND 1. SPREAKER INPUT FROM NX310WA
2, SPREAKER OUT TO NX310WP
3, REMOTE BASS KNOB
4, ANANOG/DIGITAL INPUT
5. ANANOG/DIGITAL OUTPUT
1
1
2
3
4
5