NavAtlas NS14A, Installation & Owner'S Manual, Page: 4 / 11

NS14A/NS27A/NS35A INSTALLATION
4
When mounting the sound bar using the adjustable mount, please be sure to use
the appropriate size clamp for your bar size. Please use only the supplied screws
to fasten clamp
WARNING : When inserting screws please hand
tighten first before fastening and make sure the
screw is straight and not at an angle, this will
damage the screw thread of the mount.
When using the flush mount brackets, please be sure to use the supplied screws
when installing. Select the appropriate gaskets for your bar size, you can mix
and match the gaskets if the bar size is slightly smaller or bigger
PLEASE CUT CLAMP
GASTKET TO DESIRED
SIZE WHEN MOUNTING
SCREW THIS
SIDE FIRST
WHEN MOUNTED ON BAR,
THE OVAL HOLE WILL GIVE
ROOM TO ADJUST WHEN
INSERTING SCREW
WARNING : WHEN INSERTING SCREWS,
MAKE SURE TO ALIGN SCREW WITH
ANCHORS
SLIDE SCREW ACHORS INTO SLOTS AND
POSITION UNDER SCREWS
INSTALL TOP SCREWS FIRST WHEN
MOUNTING
Preparation/Installation