For manually programing the NCR2 radio, you can store up to 255 channels and customize each by name, each
channel can be programmed by the following instruction:
Setting Channels
Set the radio in VFO mode by pressing the VFO/MR button to scroll between functions
Input the frequency using the keypad
Press and hold the VFO/MR button
Select the channel number you wish to save on using the Dial knob
Press the Menu/OK button to save
If there is a (*) star next to the channel number, then it has already been used/programmed.
Naming Channels
Set the radio in CH mode by pressing the VFO/MR button to scroll between functions
Press and hold the MR/EDIT button
Press DEL to clear and use the keypad to input label
Press the Menu/OK button to save
When using keypad, press the # to change input mode (lower case, upper case, or symbol).
20 characters MAX per label.
VFO/MR
Button
Menu/OK
Button
