Making Your Job More Enjoyable
A
�
VA.C
4. After entering Charge mode,)) of the charge symbol
rn
will begin to flash. When the charge
volume is down to the last 1.8oz, the scale will begin to sound an alarm, and Charging/Recovery
Complete Sign [!]will begin to flash, indicating to the user that charging is about to finish. The
following will be displayed:
�
0110
Controller
._, Lb
0110
Scale
- '
rn
nLI 1
oz
u .. '
5. When the charge weight reaches the set charge amount, charging is complete, then you
will
manually terminate the system charging, and press§ and the alarm stops. At this point the LCD
screen
will
display the gross weight of the refrigerant container.
�
0110
Controller
JS
0110
Scale
Lb
L
nn,
UJ.C
oz
Note:
During the charge input entering process, if there is an input error need to be re-entered, you only
need to press the shift buttonG, to move the flashing figure to the position of the figure to be
corrected. Re-enter the correct figure to complete the correction of the charging weight.
Charging default is 0 after hand held start-up, and press again "charge" will display the
measurement oflhe last charge. You can resetthe charging weight at this lime.
2.6. Recover mode operation
This function allows users to rapidly and safely recover refrigerant from the system. After entering
Recover mode, input the recover value to start recovery process. The recovery volume must be at
least 1.8 oz .
1. Switch on the scale.
2. Place the refrigerant container on the scale and wait until the reading stabilizes, displaying the
total weight of the container. For example, if the total weight of the container is 29 lbs+15. 7oz, the
06
Making Your Job More Enjoyable
A
�
VA.C
display
will
be as follows:
�
0110
Controller
,o
0110
Scale
(;,
Lb
,r,
'J. '
oz
3. Press the recover button�and the LCD screen will display the recover symbol. Enter the net
value you wish to recover, and press Enter§. At this point the net weight of refrigerant
recovered to the container from the system will be displ�d. For example, if you want to recover
4 lbs+6.5oz of refrigerant, first press the recover button�, then enter "0-0-2" via the key pad in
accordance with the flashing number on the LCD display screen, before pressing§. The display
will be as follows:
�
0110
Controller
nLb
0110
Scale
L.f
rn
n oz
u
4. After entering Recover mode,)) of the recover symbol
rn
will begin to flash. When the
recover weight is down to 1.8oz left to go, the scale will begin to issue an alarm sound, and the
charge/recover completion symbol [!]will begin to flash, telling the user that the recover is
about to finish. The display is as follows:
•
0110
Controller
,.�
0110
Scale
J
Lb
nLlt_,
u .. '
oz
07
