Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV
misuse of its product. If you do not agree, please d
intended for off-road use and passenger entertain
Operation
To operate the video in motion, press the return
button on the steering wheel 2 times. To disable
video in motion, repeat this step.
*NOTE – VIM will be reset with every key cycle.
that are located on the top of the radio.
Using an angled skew driver, loosen the
screws all the way to release the radio.
*
NOTE
– The screws will not pull out,
they move a bar down on the backside
of the radio to release the radio from
the dash.
4.
Remove the radio from the dash.
5.
Install provided harness and filter. Be
sure to plug in USB cable and run it to
an accessible location for future
updates.
6.
Reinstall in reverse order.
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
e, please discontinue use immediately and return product to place of purchas
entertainment only.
To operate the video in motion, press the return
the steering wheel 2 times. To disable
VIM will be reset with every key cycle.
are located on the top of the radio.
Using an angled skew driver, loosen the
screws all the way to release the radio.
The screws will not pull out,
on the backside
of the radio to release the radio from
dio from the dash.
Install provided harness and filter. Be
sure to plug in USB cable and run it to
an accessible location for future
Jack Randall
March 25, 2010
2 |
P a g e
TV Corp. would not be held liable for
of purchase. This product is
