BHM
03/02/15
NTV-DOC203
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
4.
Connect the smaller white plug
side of the provided
LVDS
Video Cable
to the port on
the W205-RVC interface
labeled
‘LVDS-IN’
.
5.
Connect the free end of the provided
LVDS
Video Cable
back to the factory radio at the
‘DISP’
(dark blue) port.
6.
Connect the provided
Cam input harness
to the 4-pin port on
the W205-RVC interface labeled
‘CAMERA IN’
.
7.
Connect ground and ACC power for your camera to the
black
(GROUND) and
red
(12V OUT) wires from the
provided
CAM input harness. NOTE:
This power source will
supply 12v ACC whenever CAN data is awake.
8.
Connect the white plug from the
‘Power/CAN Harness’
to the port on the W205-RVC
interface labeled
‘POWER/CAN’
.
9.
Optional:
If adding an additional video input, connect
the provided
‘Video in Harness’
to the 2-pin port
on the interface labeled
‘CAMERA IN’.
Note: if AUX
Video/front camera is desired, dip switch #2 must be in
the ON (down) position. By default, placing the vehicle in drive will show this AUX video source
briefly.
This option is selectable via the Menu, see ‘Operation’ on the next page.
10.
Start the car and test for proper functionality before replacing any dash pieces.