BHM
11/24/15
NTV-DOC245
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
Installation
1.
With the radio removed, disconnect all harnesses and set the
radio aside.
2.
In the main square radio plug, locate the 12-pin black plug and
remove it (press clip on top and pull).
3.
Separate the outer shell from this OEM connector and insert the
provided 12-pin plug in its place (this connector only connects
properly in one direction).
4.
Connect the OEM 12-pin to the female end of the plug & play portion of the harness
from step 3. Connect the new harness assembly back into the Main OEM Radio
connector like shown.
Main OEM
Radio Connector
OEM 12-pin
outer shell
Provided 12-PIN plug & play
OEM 12-PIN Harness
OEM 12-pin
& outer shell
NOTE: if you insert
this connector
upside down, it will
result in no picture
at the monitor.
