BHM
10
/
18
/18
NTV-DOC245
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
5. Locate the
black
and
red
wires labeled (GND) and
(ACC) and solder these wires to the
ground wire
(PIN 12)
and
constant 12v power wire (PIN 15)
on
the same quad-lock connector (from step 4):
6.
Locate the OEM, typically
Dark Blue
,
4-pin round
connector (LVDS) that was removed from the radio in step 1 from the port on the radio
labeled
‘DISP’
. Connect this factory plug to the W204-H interface at the port labeled
‘VIDEO OUT’
.
7. Connect the white plug side of the
provided
LVDS Video Cable
to the
port on the W204-H interface labeled
‘VIDEO-IN’.
8. Connect the free end (aqua) of the provided
LVDS Video Cable
back to the factory radio at
the ‘DISP’
(dark blue) port.
NOTE:
If there is no dark blue LVDS video plug present, use the cable that makes the OEM
screen disappear when unplugged (while radio is on).