BHM
10/18/18
NTV-DOC327
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 |
P a g e
VOLVO-CAM17 Interface Installation
1.
Remove all panels and screws to gain access behind the
screen
.
2.
From the provided
Power/CAN Harness
, connect the following wires to the car:
3.
Disconnect the OEM LVDS screen cable and connect it to
the interface at the port labeled
‘LVDS IN’.
NOTE: Use the
LVDS extension
provided if necessary.
4.
Connect the provided
LVDS Cable
from the interface
port labeled
‘LVDS OUT’
and back to the monitor
Interface wire
Description
Volvo Connection
Red (ACC)
12v ACC (+)
Cigar lighter
Black (GND)
Ground (-)
Cigar lighter
White (HAND)
LIN (data)
PIN 11, Gray/Yellow (monitor)
Blue (CAN1-H)
CAN HIGH
White/Green (OBD - extend)
White (CAN1-L)
CAN LOW
Green/Yellow (OBD - extend)
NOTE: Connect the provided white (2-pin, single
wire) LIN cable to the 2-pin (black & red) connector
off the main harness, if not already connected.
Back of screen
