Nav TV SRX VIM Installation Manual Download

Page: 4 / 4

JR, BM

05/17/2016

NTV-DOC105

4 |

P a g e

Agreement

End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for

misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is

intended for off-road use and passenger entertainment only.

Operation

VIM/CIM toggle:

Press and hold the PHONE/VOICE button on the steering wheel for 3 seconds.

Forced Rear Camera toggle:

Press the MUTE button on the steering wheel

twice within 1

second.

Note:

When VIM is enabled, GPS tracking will not be available.

Hold (3 secs):

Enable

VIM/CIM

Double Tap:

Enable forced cam

-End User Quick Reference-

Summary of Contents for SRX VIM

Page 1: ...road use and passenger entertainment only 120 NW 120th Ave Coral Springs FL 33065 TEL 561 955 9770 FAX 561 955 9760 www nav tv com info nav tv com SRX VIM NTV Kit394 The SRX VIM enables video in motio...

Page 2: ...lver trim panel around the cup holder and shift plate This will expose 4 screws around the cup holder and 2 screws in front of the pocket under the radio Remove these screws 5 Open the center console...

Page 3: ...und 4 On the provided main 44 pin T Harness the RCA labeled Rear Cam must be connected to the RCA labeled Factory Cam or you will lose the SRX factory rear camera image 5 Optional If you want to be ab...

Page 4: ...and return product to place of purchase This product is intended for off road use and passenger entertainment only Operation VIM CIM toggle Press and hold the PHONE VOICE button on the steering wheel...