BHM
06/06/16
NTV-DOC260
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
7 |
P a g e
13. Connect the T-ribbon and 2-
PIN connector (from second
ribbon) properly into the
provided
modification PCB
, and
secure down nearby using
double-sided tape (in this case,
on top of the SAT tuner)
14. Connect the provided
Mini-
HDMI Cable
carefully to the port
on the
modification PCB
, and run it
out the back of the unit.
You may
need to cut a notch into the
chassis of the radio to allow for
clearance. Do so carefully.
15. Replace all Torx screws and put the radio back together. Proceed to
RGB-PCM3.1
Installation
to complete the install.
