BHM
11/12/18
NTV-DOC334
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of
its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road
use and passenger entertainment only.
4 |
P a g e
2.
Connect the provided T-Harnesses between the vehicle harness and the APIM (screen), and
from the vehicle harness and the OEM camera module (directly behind screen).
3.
Optional:
If the user wants to use an analog trigger for camera display, wire the INPUT (for the
forced feature desired) to a toggle switch so that the INPUT wire receives 12v (+) when
activated. See pin out chart on page 2.
4.
Connect the 18-pin plug to the VIM module and secure it in the sub-dash so that nothing
rattles.
NOTE: No other wires from the unit are used for this installation.
5.
Return the screen to the sub-dash and reconnect the climate/screen surround panel for testing.
6.
Proceed to ‘
COD-F5
Operation’.
IPM (camera module)
Rear of APIM (screen)
COD-F5