Agreement:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. Would not be held liable for misuse of it’s product.
If you do not agree, please discontinue use immediately and return product to place of purchase.
This product is intended for off-road use and passenger entertainment only.
WARNING:
Check entire surroundings while backing. Do not become distracted by using COMAND.
X164
Installation Instructions
Wiring
Fig. 2 - Car Wiring Vs. X164
1. Unplug factory power connector from
radio. Plug in the X164 adapter harness to
factory harness, Radio and X164 Module.
2. Female RCA: Video input to COMAND.
Connect to Video source or Camera, or to
supplied video switcher if 2 video sources
are present
(Video OUT).
3. Male RCA: Output of Factory Camera.
Plug into switcher If camera present
(Video 1)
.
4. Video Switcher: connect Black wire to
ground,
White/
Red wire to White / Blue on
X164 (R12V out). The switcher
will then activate automatically when in
Reverse.
White / Blue
+12V Reverse OUT, 500mA
White / Red
+12V Acc. OUT, 500mA
Programming - Proceed only once !
Fig. 3 - Programming
Simultaneously Press the steering wheel
(Talk) and (Hang) and (+) and (-) buttons to
program radio. Observe the DIAGNOSIS
message on the radio followed by a radio
reset.
Remove Radio
Fig. 1 - Radio Removal (GL Class)
1. Remove TORX Screws behind ashtray.
2. Remove ashtray.
3. Pull, remove bottom of A/C Wood Trim.
4. Remove TORX Screws securing locks.
5. Pull down locks, Remove Radio.
Camera Interface for 2006-Up Mercedes-Benz GL, ML, R Class SUV’s
Compatible
with Alpine made US MCS COMAND Head units, Mercedes P/N ending with :
1779, 1789, 3879, 4089,4079 3689
Not compatible with Models not listed or European Head units
3950 NW 120th Ave Coral Springs
, FL 33432
Tel. 561-955-9770 Fax. 561-955-9760
X164
BHM 3/18/15
NTV-DOC026
Summary of Contents for NTV-KIT041
Page 3: ......