Toyota 4S Navigation System Installation
1 |
P a g e
Important: This system is designed for Toyota Entune Plus Radio
with
APPS
button. Please refer and verify with the following radio
model before proceed
(radio model number is located in the front of
radio below the display screen)
.
2014.5
Camry Apps Radio
P 10507
Pioneer
2015
Camry Apps Radio
P 10719
Pioneer
2014-15
Highlander Apps Radio
P 10431
Pioneer
** Please contact us or your distributor if your radio model does not match the
description above. We will not be responsible if you continue the installation process
without verification. Any dash removal and radio dissemble should not be performed
without confirmation. **
Note:
This package has different hardware configuration than our previous Toyota systems.
Please be aware and pay attention to all information from this manual.
WARRANTY DISCLAIMER NOTICE!
Radio removal, disassembly, installation
of Navigation Electronics, and Radio re-assembly / re-installation is the responsibility
of the installer. It is recommended that you contact a professional installer that is
experienced with proper work methods involving electronics and knowledgeable of
specific procedures for radio disassembly, Navigation Electronics installation, and re-
assembly / re-installation of the Radio Head Unit in the vehicle.
INSTALLATION
DAMAGE TO THE VEHICLE RADIO HEAD UNIT IS EXPRESSLY NOT
COVERED UNDER THE PRODUCT WARRANTY.
To avoid dangerous distractions that may lead to an accident, the driver should never
operate the system while the vehicle is in motion. Before installing the product, the
seller should inform the end-user of proper use and compliance with the proper
instructions and all states and federal laws.
Before beginning your installation, familiarize yourself with the installation
instructions and the Navigation system components.
CAUTION:
It is advisable to disconnect the negative battery cable for 3 minutes
before beginning installation, to avoid unintended air bag deployment. Note and
record any anti-theft radio codes prior to disconnecting.
NTV-DOC228
