NNG-GM2 (LVDS MYLINK/CUE) 8” Navigation Installation
1 |
P a g e
GM2 Module Dip Switch settings
WARRANTY DISCLAIMER NOTICE!
Radio removal, disassembly, installation of
Navigation Electronics, and Radio re-assembly / re-installation is the responsibility of
the installer. It is recommended that you contact a professional installer that is
experienced with proper work methods involving electronics and knowledgeable of
specific procedures for radio disassembly, Navigation Electronics installation, and re-
assembly / re-installation of the Radio Head Unit in the vehicle.
INSTALLATION
DAMAGE TO THE VEHICLE RADIO HEAD UNIT IS EXPRESSLY NOT COVERED UNDER
THE PRODUCT WARRANTY.
Before beginning your installation, familiarize yourself with the installation
instructions and the Navigation system components.
CAUTION:
It is advisable to disconnect the negative battery cable for 3 minutes
before beginning installation, to avoid unintended air bag deployment. Note and
record any anti-theft radio codes prior to disconnecting.
NNG-GM2
Application List (please contact us if you don’t see your vehicle listed)
2014 - 2015
Chevrolet
Silverado
8” touch screen
2014 - 2015
Chevrolet
Impala
8” touch screen
2015
Chevrolet
Tahoe
8” touch screen
2015
Chevrolet
Suburban
8” touch screen
2014-2015
GMC
Sierra
8” touch screen
2015
GMC
Yukon
8” touch screen
2014-2015
Buick
Regal
8” touch screen
2014-2015
Buick
Lacrosse
8” touch screen
2013-2015
Cadillac
ATS / XTS
8” CUE system
8” CUE system
SRX / CTS
** Cadillac vehicles above use
NTV-KIT603
main harness **
2014-2015 Chevrolet
Corvette
** Corvette use
NTV-KIT556
main harness, please contact us for special order **
NTV-DOC216
1: Vehicle
Type
4: Rear
camera
settings
7: Reset
Module
