JR, BM
4/11/14
NTV-DOC137
rB4
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
Factory Connector
Supplied
Coupler
Fiber Extension Cable
*Steering Wheel Controls:
-
Some radios are controlled by a single wire
(Kenwood)
-
Some radios are controlled via 3.5mm plug. For
these radios, connect the supplied 3.5mm jack
wire (center lead) to the
White (IR OUT)
wire and
plug male end into radio IR port.
5.
Connect interface harness to proper wires using the wire chart provided on pages 3
& 5.
Note: not all connections are necessary for every install, some wires may be
optional.
Note 2:
Reverse not supported on HUR-997 (sports car) KIT210.
6.
Note:
the aftermarket radio’s
constant power, ground, and power antenna
need to
be connected to vehicles radio harness, the interface does not provide these
connections.
7.
SOLDER ALL CONNECTIONS!
Basic MOST-HUR connection diagram
