Page 1
1
Side Camera Installation (only)
If you're installing turn signal cameras and the vehicle already has an OEM reverse camera, make
connections according to this digram below:
If you're installing turn signal cameras
and a reverse camera, a VSW-R is required
and you must
make connections according to the diagram on the next page.
- For this installation scenario, set up the 'AV-TYPE' menu to 'L-AV + R-CAMERA'
:
1. With DIP 4 DOWN, place vehicle in reverse
2. Press 'OK' on remote 4 times, then press POWER (IR eye must be
connected)
3. Scroll down to 'AV TYPE', set to 'L-AV + R-CAMERA'
4. Press 'MODE' and wait for menu time out
5. Return
DIP Switch #4
back to
UP
, disconnect and reconnect power plug
once