BHM
10/26/16
NTV-DOC270
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
GM-LVDS Operation
After all connections are made and
dip switches set properly
, start the vehicle. Placing
the vehicle in reverse will show the connected rear camera, with dynamic guidelines
overlaid onto the media screen.
If adding a front camera, this must be
activated in the OSD menu (see page 5)
or by setting DIP SWITCH #2 to ON
.
Forcing this camera on at any time is
performed by holding the
HOME
button or
MENU
button on the screen
bezel for 3 seconds.
The module will
cycle through video modes in this
order: OEM>NAV>AV1>AV2>OEM, and
will only show inputs that are active.
Additionally, a single press of HOME,
RADIO or MEDIA will bring you back to
the OEM screen immediately.
Additionally, setting the
REVERSE WIRE
to
AV1
in the
AUX menu and sending 12v to the
green wire
will force the
AV1
source as well.
If the user wishes for the front camera to be set on a
timer
(front camera shows after
leaving reverse gear, for preset amount of time), activate this feature in the OSD menu
(see page 5).