BHM
05/01/15
NTV-DOC211
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
5 |
P a g e
NOTES:
Any wires not shown here
are not needed for this
installation.
Not all wires shown here
will be used for every
installation.
If installing ONLY rear
camera, you may connect
signal directly to the
‘Supplied RCA’
Refer to page
3, step 4 for
specific wiring
instructions
Installation Diagram
Ford 4” UNI-CAM Operation
After all connections are made and programming is complete, placing the vehicle in reverse will
automatically display the connected rear camera’s image.
If
forced rear camera
is desired, connect
input 1
(red) to 12v (+)
through a toggle
(not included)
and the rear image will show whenever activated.
If a front camera was added,
force this camera
by connecting
input 2
(blue) to 12v (+)
through a
toggle
(not included).
