A²B® is a registered trademark of Analog Devices Inc.
BHM
07/18/18
NTV-DOC320
2 |
P a g e
ZEN-A2B Interface
NTV-ASY272
ZEN RCA Harness
NTV-HAR315
NOTE: All vehicles require SYNC3, this
interface only applies to vehicles equipped
with A
²B® (
B&O
or
Revel
Amplifiers)
The ZEN-A2B processor seamlessly converts 2018+ Ford factory A²B® (Automotive Audio Bus) to 12-channel
analog RCA and TOSLink output. Adding aftermarket amplifiers to the OE B&O or Revel amplified SYNC3
system has never been so simple and seamless. This kit integrates with the OEM A²B® bus to retain volume
control, full fade and balance (analog only), treble, mid-range, bass control & Bluetooth voice calls with no
external speaker (true OEM integration).
NOTE: 2018 vehicles not equipped with a factory B&O or Revel
amplified system are not equipped with A²B
®
bus and do not require this interface.
ZEN-A2B overview
ZEN-A2B Compatibility SYNC3)
Overview
Kit Content
Year(s)
Make
Model
NOTE:
2017+
Ford
F150, Escape, Raptor
With B&O
2018+
Ford
Expedition
With B&O
ZEN-A2B Harness
NTV-HAR325
USB Cable (updates)
NTV-CAB009
A
²
B
® Input
USB (updates)
Analog RCA outputs
WARNING: Due to the complexity and sensitivity of the OEM Ford A²B®, the ZEN-
A2B must be used with amplifiers that are grounded directly to the battery. The
resistance to (true battery) ground of the Amplifier(s)
must not exceed 1 ohm,
otherwise you will likely experience performance issues with the ZEN-A2B.
DIP switches
Status LED
--NOT USED--
Power/CAN
TOSLink output