BHM
11/4/13
NTV-DOC148
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
6.
Connect the provided LVDS video cable to the LVDS connector on the
media screen. Run the other end of the cable to where you plan to
secure the BMW09 interface. Plug the free end of this cable into
the port labeled
‘LCD-OUT’
.
If there is no space behind/beneath
the radio for the interface, drop the glove box on the pass side and secure it to a flat
surface close to the radio dash opening with Velcro.
7.
Run the factory LVDS video cable from the BMW09 port labeled
‘LCD-IN’
to the radio
dash opening (it will connect to the radio’s LVDS connector later).
8.
Connect the AV Input cable to the port on the BMW09 interface labeled
‘AV IN/OUT’
. If
you’re only connecting a reverse camera (and no other
inputs), the signal input from the camera must connect
to the RCA labeled
‘REAR-C’
. Refer to the dip-
switch settings chart to skip/enable AV sources
upon toggle switch presses (optional. Page 2).
a.
If you’re installing a Nav-TV
CAM 6
or
Handle Cam
as
well, the power connector
plugs directly into the
BMW09 interface port
labeled
‘R-CAM’
.
9.
Optional:
Connect the remote eye to the port labeled
‘IR’
and
leave it in clear view of the driver (often it can be stuck inside a
vent). This connection would be necessary if you want to be able
to adjust anything from the BMW09 interface’s menu.
a.
While in any AV mode other than factory
(on the display
screen), press the
MENU
button
for
Menu 1
,
or
hold the
left arrow
to enter
MENU 2.
b.
To switch between AV modes, press the
‘OK’
button.
10.
Optional:
Connect the provided momentary toggle switch to the
port on the BMW09 interface labeled
‘MODE’
. Pressing this switch with the ignition on
will cycle the screen modes as follows:
factory screen >
NAVI (RGB) > AV1 > AV2 > AV3 > factory screen
.
