BHM
02/14/17
NTV-DOC244
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
5.
Connect the free end of the provided
LVDS Video Cable
(green) back to the factory radio
at the appropriate port.
6.
Connect the provided 12-pin plug & play portion from the main power harness to the
main factory MMI connector as shown below. Pay attention to the orientation, as this is
vital to proper operation:
Remove gray OEM 12-pin
Connect OEM 12-pin to provided 12-pin
(black, PIN-side).
NOTE: blue and green wire
corner locations on provided plug vs OEM.
Connect the female 12-pin side of the
plug & play portion to the OEM main MMI
connector as shown.
Note the paint dot
must face towards the power wires.
If the connector does not secure properly,
zip tie the harness in place to surrounding
wires
leaving slack so that the connector
stays in place.
Use a spot of glue on the
back side if you’re still concerned with
this.
Note: sometimes it is easier to connect
the main plug back to the MMI first and
then connect this 12-pin in.
