Getting to know your Naucon-40
Available programs
Start
Start timing
Split
show the split time on
the multi timer display.
The on-screen time is
frozen for 4 seconds but
the time keeps running in
the background. The split
time is not stored in the
multi timer
Setup
Press SETUP. Use
↑
and
↓
until desired
program is indicat-
ed in the display
of the multitimer.
Press ENTER to
confirm
The remote
The remote control is supplied by 2 pcs. standard AA alcaline batteries, LR6,
1500 mAh. Battery lifetime is 3 years in average or 80.000 pressures to the
remote. The remote control has a range of approx. 100 m in direct and free
line (no obstacles or interferences).
How to select a program
Programs are selected by operating the grey buttons on the remote control.
Press
SETUP
. Use
↑
and
↓
until desired program is indicated in the display of
the multitimer. Press
ENTER
to confirm
Program 1: Clock functions
Clock:
Shows “Time of day”
Clock setup:
Press
↑
two times. The first two digits start flashing and
the following must be entered:
HH/MM/SS
(Hours, minutes, seconds)
Press
↑
or
↓
to select the correct time. Press
ENTER
to
confirm and continue until all digits are entered.
Date setup:
Press
↓
two times. The first two digits start flashing and
the following must be entered:
DD/MM/YY
(Date, month, year)
Press
↑
or
↓
to select the correct date. Press
ENTER
to
confirm and continue until all digits are entered.
Count down:
Can be set to count down from a given time or date.
Press
SPLIT
two times. The display now shows
1 OFF
.
Press
↑
or
↓
until
1 ON
is shown and press
ENTER
. Now
the first two digits will flash and the following must be
entered:
DD/MM/YY
and
HH/MM
Press
↑
or
↓
to select the correct time and date. Press
EN-
TER
and continue until all digits are entered. The multitim-
er is now set to count down to the selected time and date.
Turn OFF
Count down
Press
SPLIT
two times. Press
↑
or
↓
until
1 OFF
is dis-
played and press
ENTER
Enter
Confirm
Stop
Stop timing
Reset
Press STOP and then
RESET to perform a
total reset and start a
new timing
Battery test
1. Dismount battery cover
2. Place the remote as shown in the picture
3. Press any button. If red light flashes batter-
ies are fine
Nautronic Scoreboard System - www.nautronic.com
Nautronic Scoreboard System - www.nautronic.com
