Nautilus NT 1810, Assembly Manual, Page: 6 / 8

A. Slide the entire Smith Bar Assembly (A) to the top of the cage,
and engage the safety hooks into the cage, so that it is in the
racked position.
B. Thoroughly tighten the Set Screws (D) in the 2-Guide Rod
Holders (B). Also tighten the 4-Button Head Cap Screws (C)
that hold the 2-Guide Rod Holders (B) in place.
C. Disengage the Smith Bar Assembly (A), and lower it to the
lowest possible resting position. Thoroughly tighten the Set
Screws (F) into each of the two Lower Guide Rod Holders (E)
on the cage, and tighten the 2-SET SCREWS (F).
TM
5
step
3
NT-1810
B
C
D
E
F
A
Step B
Step C