Page 15
18. Remove the set screw 731-0570 from the end of the chest
pad assembly.
19. Pull down on the pop pin to install the chest pad.
20. Reinstall set screw once chest pad post is through
weldment.
21. Attach seat assembly to carriage with four M8x1.5, 20mm
bolts and #8 washers.
22. Attach the 4 weight horns to the left and right weldments
as shown with two M8x1.25, 25mm bolts, four #8 washers
and 2 #10 nuts through each weight tube, with the plate
on the inside of the weldment. The bumper stop slides on
when the bolts are secure.
23. Install footpads prior to bolting unit down.
24. Assembly is complete. Make sure all fasteners are tightened
to the specifications listed on page 8.
