![background image](http://html2.mh-extra.com/html/nautilus/be-strong-nv915/be-strong-nv915_assembly-manual_3522832009.webp)
9
LCD TV Stand Assembly Guide
Assembly Procedure
Step 5 Insert Upper Mast into Lower Mast
Tools Needed:
• 5mm Allen Wrench
Parts Needed:
• Upper mast
5-1 Slide the Upper mast and Locking Collar into the Lower mast with the warning sticker on the
Upper mast and the Locking Collar Clamp toward the back of the stand. (Figure A)
Note: The Locking Collar will fit very tightly into the Lower mast.
make sure the Locking Collar is fully inserted into the Lower mast
5-2 With the Locking collar fully inserted, continue to insert the Upper mast until the
Warning Sticker is no longer visible above the Locking Collar. (Figure B)
5-3 Insert the m6 Cap Head Allen Screw and m6 nut into the
Locking Collar. Adjust Upper mast to desired height and
completely tighten the hardware. (Figure C)
Back
Locking Collar
Upper Mast
Insert until warning sticker is
no longer visible
Figure
Figure
Figure